DLE35RA Cc GAS Engine For RC Airplane Fixed Wing Model Single Stroke Two Exhaust Wind Cold Hands Start Ater
Basic Properties
Place of Origin:
China
Brand Name:
Mayatech
Model Number:
DLE35RA
Trading Properties
Minimum Order Quantity:
1 piece
Specifications
| Type: | Engine | Material: | Metal |
| Gender: | Unisex | Age Range: | 14 Years & Up |
| Use: | Vehicles & Remote Control Toys | RC Parts Accs: | Engines |
| Size: | 230*246*143mm | Quantity: | 1 Pcs |
| Remote Control Peripherals/Devices: | Motor | For Vehicle Type: | Airplanes |
| Tool Supplies: | Assembled Class |
Product Description
| Product Features | |
| RC Parts & Accs | Engines |
| Age Range | 14 Years & up |
| Use | Vehicles & Remote Control Toys |
| Size | 230*246*143mm |
| Quantity | 1 pcs |
| Material | Metal |
| Gender | Unisex |
| Model Number | DLE35RA |
| Brand Name | Mayatech |
| Remote Control Peripherals/Devices | Motor |
| Type | Engine |
| For Vehicle Type | Airplanes |
| Tool Supplies | Assembled class |
DLE35 Model Gasoline Engine Two Strokes Single Cylinder Rear Exhaust Natural Air Cooling Hand Start 35CC Emission
Details Images
Product Paramenters
Packing list: DLE engine * 1 DLE electronic igniter set (CDI) * 1 Carburetor * 1 Engine aluminum column nail set * 1 Exhaust pipe group * 1
Product parameters performance:4.1HP/8500rpm Idle speed:1500rmp / min Tension:9kg / 100M above sea level,7.8kg, altitude 1800 m Applicable propeller specification:18*10 19*8 20*8 20*10 Applicable spark plug model: NGK CM6 Exhaust volume:34.9cm³ Cylinder bore x Stroke:38.5mm*30mm Compression ratio:7.6:1 Lubrication ratio:30:1 Weight of main engine:930g Weight of exhaust pipe:120g Weight of igniter:140g Voltage of igniter:4.8v-8.4v
Note:
If the engine is to be run in or tested on the test bench,There must be a good shock absorber,Otherwise, some parts of the engine may be damaged,It is best to install the engine on the aircraft for running in.
When the engine is running,No one is allowed to be in front of the propeller rotation plane.
If the engine is to be run in or tested on the test bench,There must be a good shock absorber,Otherwise, some parts of the engine may be damaged,It is best to install the engine on the aircraft for running in.
When the engine is running,No one is allowed to be in front of the propeller rotation plane.
Product specification
Net weight of engine: 915g (excluding accessories)
Weight after packaging: 1678g (slight error)
Length after packaging: 246mm width: 230mm height: 143mm
Net weight of engine: 915g (excluding accessories)
Weight after packaging: 1678g (slight error)
Length after packaging: 246mm width: 230mm height: 143mm