Walksnail Ws-M181 Gps Gnss Built-in Qmc5883 Ceramic Antenna for Rc Airplane Long Range Model
| compatible brand: | / | Material: | Composite |
| private mold: | Yes | RC Parts Accs: | Antennas |
| type: | / | Remote Control Peripherals/Devices: | Remote Controller |
| For Vehicle Type: | Helicopters | Upgrade Parts/Accessories: | Adapter |
| Tool Supplies: | Assembled Class | Four-wheel Drive Attributes: | Assemblage |
| Product Features | |
| compatible brand | / |
| RC Parts & Accs | Antennas |
| Material | /, Composite Material |
| place of origin | Guangdong, China |
| type | / |
| Remote Control Peripherals/Devices | Remote Controller |
| brand name | Walksnail, uuustore |
| For Vehicle Type | Helicopters |
| Upgrade Parts/Accessories | Adapter |
| private mold | Yes |
| Tool Supplies | Assembled class |
| Four-wheel Drive Attributes | Assemblage |
| Specification | |
| name | Walksnail WS-M181GPS |
| Chip: | M10 (ten generation chip) |
| Frequency: | GPS L1,GLONASS L1,BDSB1,GALILEO E1,SBAS L1.QZSS L1 |
| Power: | 5V |
| Size: | 18mm*18mm*4.6mm |
| Antenna: | ceramic antenna (oil spraying process, prevent scratching and oxidation) |
| Receiving channels: | 72 search channels |
| Compass: | QMC5883 |
| Baud rate: | 115200dps |
| Output protocol: | NMEA UBX (dual protocol) |
| Output frequency: | 1Hz-10Hz, Default 10Hz |
| Speed accuracy: | 0.05m/s |
| Horizontal positioning accuracy: | 2D ACC1.5m(open air) |
| Receiving sensitivity: | Trace-162dBm Capture -160dBm |
| Dynamic characteristics: | |
| Altitude: | 50000m |
| Speed: | 500m/s |
| Acceleration: | 4G |
| Operating temperature: | -40°C- 85°C |
| Storage temperature: | -40°C- 105°C |
Bullet Point
- With small size, light weight, fast positioning, and stable connection. It is suitable for FPV, RC airplane, quadcopter and others to enhance the flight experience.
- Featuring the ubx M10 platform UBX-M10050 GNSS chipset and BUILT-IN QMC5883 MAG, the module offers stronger performance and more accurate positioning.
- The ultra-thin ceramic antenna uses a special spray painting process to prevent oxidation and scratching, ensuring consistent positioning performance.
- The built-in battery can realize hot start and realize positioning quickly.
- It offers six positioning modes, providing more flexible combinations (default GPS GLONASS BDS multi-mode positioning).The measured maximum number of search stars can cover 32pcs.
Note:
Because the GPS chip is a new 10th generation chip, the flight controller needs to flash firmware 4.29 and above, and the firmware below 4.29 uses the NMEA protocol.
JX Servo PDI-1181MG 18g 3.5KG Metal Gear Digital Core Servo for WPL RC Car B24 C14 C24 Helicopter Airplane Robot
FeaturesJX Servo PDI-1181MG 18g 3.5KG Metal Gear Digital Core Servo for WPL RC Car B24 C14 C24 Helicopter Airplane RobotProduct DetailDead band: 2μs Working frequence: 1520μs / 300hz Motor: Core Operating Voltage: DC4.8~6.0 V Operating Speed (4.8V): 0.13sec/60° Operating Speed (6V): 0.11 sec/60° ...
JX CLS-HV7346MG 46KG HV High Voltage Waterproof Steel Gear Digital Standard Servo for RC Car Helicopter 1/10 Car Crawler
JX CLS-HV7346MG 46KG HV High Precision Steel Gear Full CNC Aluminium Shell Structure Digital Standard Servo Features-- High voltage-- High performance programmable digital coreless standard servo-- High-precision Taiwan-made steel gears with hard anodizing-- Full CNC aluminium Shell structure-- Dual ...
JX Servo CLS6036HV 36kg CNC Aluminium Shell Metal Gear High Voltage Coreless Digital Servo
JX servo CLS6036HV 27kg Aluminium Shell Metal gear High Voltage Coreless Digital Servo Features CNC metal On the cover In the shellHigh-precision Taiwan-made aluminium gears with hard anodizingHigh Voltage Coreless Digital Servo What is the Details of our Product? Product DetailsDead band:1μsWorking ...
JX PDI 6221MG PDI-6221MG 20KG Large Torque 180 Degree Digital Servo Metal Gears Servo for RC Models Helicopter Spare Parts
Features Features 180 Angle 20kg digital servoHigh performance digital standard servoHigh-precision Taiwan-made aluminium gears with hard anodizingCNC aluminium middle ShelDual ball bearings Product Details Product Details Control system :PWM control (1500 u-sec is the central point)Working voltage...
