Holybro H-Flow with DroneCAN Protocol Integrated Optical Flow and Rangefinder Module
| compatible brand: | DJI | Material: | Aluminum, PVC |
| private mold: | No | Product name: | Olybro H-Flow With DroneCAN Protocol Integrated |
| Weight:: | Weight: | Selling Units: | Single Item |
| Single package size: | 20X20X20 Cm | Single gross weight: | 2.000 KG |
Holybro H-Flow with DroneCAN Protocol Integrated Optical Flow and Rangefinder Module
The H-Flow features a Pixhawk-standard 4-pin CAN connector, ensuring seamless integration with Pixhawk-compatible controllers via the CAN port. Utilizing the DroneCAN protocol, it offers reliable and high-speed data transmission between the sensor and the flight controller.
* Integrated Optical Flow and Rangefinder Module
* PixArt Optical Flow Sensor for Accurate Motion Tracking
* Broadcom ToF Sensor for Precise Distance Measurement
* Infrared LED for Optical Low-Light Performance
* DroneCAN Protocol
Specification
* PixArt PAA3905E1 Optical Flow Sensor * Tracks under low light conditions of >5 lux
* Effective Viewing angle up to 42°
* Wide working ranges from 80mm up to 30m
* Up to 7.4 rad/s
* 40mW IR LED built onto the board for improved low-light operation
* Broadcom AFBR-S50LV85D Time-of-Flight Distance Sensor * Integrated 850 nm laser light source
* Field-of-View (FoV) of 12.4° x 6.2° with 32 pixels
* Typical distance sensing range up to 30m
* Operation of up to 200k Lux ambient light
* Works well on all surface conditions
* Transmitter beam of 2° x 2° to illuminate between 1 and 3 pixels
* InvenSense ICM-42688-P 6-Axis IMU
* STM32F412CEU6 MCU
* Pixhawk Standard CAN Connector (4 Pin JST GH)
* Compact Form Factor
* Software-Controlled CAN Termination
* Weight: 15.2g (3.5g without casing)
Reference Links
* Setup Guide
* Firmware Setup & Upgrade
* Pinout
* AFBR-S50LV85D Datasheet
Package Includes:
* 1x H-Flow
* 4-pin GH cable
* 2x M2.5 Screws
* 2x M2.5 Nylon Locking Hex Nuts
accessories at extremely cheap wholesale prices.
Consultations are very welcome!
HolyBro Pixhawk 6C MINI Autopilot Controller Plastic Case for Drone Accessories
Product Description The Pixhawk® 6C Mini is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6COpen Standard and Connector Standard. It shares the same STMH743 microprocessor and sensors as the Pixhawk® 6C. Compared to thestandard Pixhawk® 6C, this ...
Holybro PCBA PM07 Power Module (14S) Power Management PM Module with 5V UBEC 2~14s LiPo Output
Specification Description:This PM07 Power Module supplies clean 5.2V to flight controller from the battery and provides current consumption and batteryvoltage measurements via analog signal through a 6 Pin JST-GH cable, along with integrated esc power & signal distribution for upto 8 ESCs. It is ...
Holybro PM08-CAN Power Module Supports 2-14S & 200A ESC with XT90 Connector Drones Accessories
Product Description Feature * Supports 2-14S & 200A Cont, 400A Burst * DroneCAN Communication Protocol * Small & Compact Design * Two 5V Output with Independent BEC IC and Circuitry * Separated Sensor and BEC Board to Minimize Electrical Noise Interference * Galvanically Isolated Current Sensor IC ...
Holybro H-Flow Integrated Optical Flow and Rangefinder Module with DroneCAN Protocol
Product Description Feature* Integrated Optical Flow and Rangefinder Module* PixArt Optical Flow Sensor for Accurate Motion Tracking* Broadcom ToF Sensor for Precise Distance Measurement* Infrared LED for Optical Low-Light Performance* DroneCAN ProtocolSpecification* PixArt PAA3905E1 Optical Flow ...
